13 Tips for Maintaining and Using a Wood-Burning Fireplace (2025)

1/13

Image Source/Getty Images

Fireplace Safety Check

Before the temperature starts to fall, there are several things you can do to make sure your wood-burning fireplace is safe and efficient. The National Fire Protection Association recommends chimneys be swept at least once a year, at the beginning of winter, to remove soot and debris. Here are some more indoor fireplace safety tips.

You can find a certified chimney sweep atChimney Safety Institute of America. Also, make sure you’re familiar withhow to work a fireplace before you attempt to start a fire.

2/13

Bartosz Zakrzewski/Shutterstock

Check Chimney for Cracks

Before that first fire of the season, check the chimney structure for cracks, loose bricks or missing mortar. You should also check your chimney liner for signs of deterioration.

Cracks and spalling on the chimney exterior indicate chimney deterioration, so check your chimney crown or have a professional take a look.

3/13

Nick Beer/Shutterstock

Cap It

Use a wire-mesh cap to cover the top of the chimney to keep birds, squirrels, rain and other debris from entering. The last thing you want while working your fireplace is to find some deceased animals coming down the flue. Caps can deteriorate over time, so be prepared to replace your rain cap if it’s corroded or been damaged by weather.

4/13

juliasv/Shutterstock

Check the Damper

The damper is a movable plate that sits above the fireplace before the flue. Make sure thefireplace damper is working properly. There should be no debris preventing it from opening and closing.This is a critical step in understanding how to start a fire in a fireplace.

“A fireplace damper is the chimney’s door, sitting at the base of the flue to control airflow,” says Hancock. “But a fireplace damper isn’t just about airflow—it’s a barrier that prevents heat from escaping and pets from entering.”

5/13

Carol A Hudson/Shutterstock

Check for Creosote Buildup

Creosote is a chemical mass of carbon formed when wood, tar or fossil fuels are burned. Creosote can linger in chimneys and you would have no idea it was present from the outside.

“Creosote is more than just a fire hazard—it’s also a health risk. Creosote, especially when it’s humid, releases chemicals that irritate people’s lungs and worsen respiratory conditions,” says Hancock.

When creosote is not removed, it can become a thick coating of debris in the flue and chimney. Most chimney fires start in the smoke chamber/smoke shelf area, so it’s important to clean those areas. Creosote ignites at 451 degrees Fahrenheit, and once it starts burning, it expands like foam sealant and can build to more than 2,000 degrees Fahrenheit in less than a minute.

6/13

Nguyn Nguyn/Shutterstock

Trim Limbs

Make sure there are no overhanging tree limbs encroaching on the chimney, and if so, trim or prune those limbs. Limbs can present a fire hazard and also restrict proper draft airflow in your fireplace.

7/13

glebchik/Shutterstock

Clean Out the Ashes

Another important step to knowing how to work a fireplace is to make sure all ashes are cleaned out of the firebox before you start stacking wood for that first fireplace fire.

You can simply sweep or vacuum the cold ashes and dispose of them outside. However, you may want to keep a few ashes around to help build a fire in your fireplace. Make sure you know how to use fireplace ash.

Be aware that coals can remain hot for up to three days, which can become a fire hazard if they come in contact with flammable materials. It’s one of several important steps for preventing fires in your home.

8/13

LI Cook/Shutterstock

Fireplace Guard

To prevent hot embers from getting out, use ametal mesh screen orglass fireplace doors. Don’t burn wood in your fireplace without a guard. Glass doors need to be cleaned regularly, too,as they tend to get a bit dingy looking as the winter drags on.

9/13

Phovoir/Shutterstock

Check Alarms

Before starting a fire, make sure all of your smoke and carbon monoxide detectors are working. We don’t think we need to explain much further about why this is so important. Be sure to follow all of oursmoke alarm maintenance tips.

10/13

Bildagentur Zoonar GmbH/Shutterstock

Test Function

Test your fireplace’s function by lighting a few small pieces of seasoned wood. Light the wood from the top down. If smoke doesn’t exit vertically from the fireplace into the chimney and instead enters the room, troubleshoot to correct any problems.

This is key to help you understand how to work a fireplace. Problems can include creosote buildup, debris in the chimney (such as birds or nests) or a closed or partially closed damper.

Also, if your home is tightly sealed for energy conservation, opening a window a little bit can provide the intake air needed to make the smoke go up the chimney.

11/13

Marina Zezelina/Shutterstock

Choose the Right Wood

Choose dense wood such as oak. Wood should be split and stored in a high and dry place for at least six months. Green woods, such as pine, are not recommended for a wood-burning fireplace since they can produce more creosote.

“If you’re burning softwoods like pine, creosote builds up faster, so yearly cleaning might not be enough—twice a year might be safer in those cases,” says Hancock.

Here’s how to clean a brick fireplace.

12/13

AdamEdwards/Shutterstock

Keep the Fire Small

Small fireplace fires generate less smoke and create less creosote buildup. When building a fire, put the logs toward the rear of the wood-burning fireplace and be sure to use kindling, not flammable liquids, to start the fire. These tips are crucial in knowinghow to work a fireplace.

13/13

Africa Studio/Shutterstock

Circulate the Air

To get the most out of your fire, run ceiling fans clockwise on low speeds to redirect the warm air from the ceiling into the living space.

About the Expert

Since 2013, Andrew Hancock has been the president of Gilman Heating, Cooling & Plumbing, a respected company in Virginia known for its century-long history in home comfort services. Before his time at Gilman Heating, Justin spent years working as a plumber and then as an HVAC expert, where he built a solid foundation of skills and knowledge.

Next, learn about gas fireplace safety.